Artwork specs & pre-flight checklist

Artwork specs & pre-flight checklist

Use this page as a final check before you upload a file. It brings together the artwork requirements already published on our DTG, embroidery and product pages, plus a short pre-flight list. If anything is unclear, email pressandstitchlab@gmail.com before you order.

DTG printing

  • File types: PNG or JPEG only. We do not accept other file types.
  • Resolution: 300 DPI.
  • Dark or coloured garments (white ink required): PNG with the background removed (transparent background). No solid background box.
  • White or light garments (colour ink only, no white underbase): JPEG in CMYK.
  • Size and placement: artwork is printed at the exact size supplied in the file, unless you add our DTG file preparation service (£15.00 per design). We cannot take responsibility for a print that comes out the wrong size if a pre-flight check has not been paid for.
  • Print areas: chest crests and logos up to 10 × 10 cm, and larger artwork up to 36 × 60 cm. We can print up to 55 × 75 cm on suitable garments — contact us for oversized or special placements, including sleeves and hoods.
  • Inks: our DTG inks are OEKO-TEX Standard 100 certified.

Embroidery

  • File types: PNG or JPEG only, at 300 DPI and scaled to the stitch size you want. We do not accept other file types.
  • Digitising: a one-off £25.00 setup fee per new design covers digitising and a test stitch-out, up to 9,000 stitches. Exact repeats of a design already on file do not pay this again. Work over 9,000 stitches is charged at +30p per extra 1,000 stitches.
  • Standard embroidery area: the design should fit within a 110 mm circle (No 15 Tubular Ring), with a standard threshold of up to 9,000 stitches.
  • Caps: maximum 60 mm height × 120 mm width.
  • Minimum line and text sizes: keep stroke thickness around 1–1.2 mm so the thread can form cleanly. Lettering under 5 mm high usually needs to be simplified so it stays legible once it is stitched.
  • Thread: we stitch with high-quality 120D/2 polyester embroidery thread, which is OEKO-TEX Standard 100 certified.

We email a photograph of the physical stitch-out for approval before the production run is stitched.

Colour matching

We do not offer a tolerance for thread or print colour matching. Colours may vary with the garment, the thread or ink, and the move from a screen or digital file to fabric. They are not guaranteed to match a screen, a proof, a Pantone reference or a previous run exactly. If colour is critical, order a sample first.

Pre-flight checklist

  1. The file is a PNG or a JPEG. We do not accept other file types.
  2. The file is 300 DPI, and scaled to the print or stitch size you want, unless you are paying for DTG file preparation.
  3. For DTG on dark or coloured garments, the file is a PNG with the background removed, and there is no leftover box around the design.
  4. Colour mode is right for the garment: PNG with a transparent background for dark DTG (white ink); CMYK JPEG for light DTG (colour ink only).
  5. The artwork is sized at the actual print or stitch size you want, unless you are paying for DTG file preparation.
  6. Placement is clear (for example left chest, centre chest, full back, cap front), and the design fits the print or embroidery area above.
  7. For embroidery, lines are at least about 1–1.2 mm thick, and any lettering under 5 mm has been simplified or is accepted as a change.
  8. Spellings, spacing and layout have been checked — we decorate the artwork you approve.
  9. You understand that colours may vary and are not guaranteed to match exactly.
  10. If the file is not print-ready, you have added DTG file preparation, or you have allowed for embroidery digitising on a new design.

Tick the confirmation box on the product form when you order to confirm the artwork is final and meets these requirements.